Flir DNR408R-N 8 Channel 2TB POE NVR Surveillance Security System,

STORE DISPLAY 8 CHANNEL FLIR NVR SYSTEM. SUPPORTS BOTH LOREX and FLIR BRAND POE NETWORK CAMERAS. DVR WAS USED AS A STORE DISPLAY. MINOR SCRATCHES AND SCUFFS POSSIBLE. FULLY TESTED AND RESET TO DEFAULT PASSWORD AND SETTINGS. HARD DRIVE IS INCLUDED. NO CAMERAS ARE INCLUDED. IF YOU NEED CAMERAS PLEASE CHECK OUT OUR STORE OR MESSAGE US. DVR COMES WITH POWER CABLE, NETWORK CABLE, HDMI CABLE AND MOUSE
About FLIR DNR408 NVR 2TB

FLIR's DNR400 Series NVR further accelerate high definition recording, offer ring higher capacity 200 Mbps processing for real-time recording with cameras up to 5MP. With eight integrated Power over Ethernet (PoE) inputs and PoE+ support, installation is made simple. No programming or configuration is necessary as the NVR automatically discovers FLIR IP Cameras on the network. Plus, drive mirroring enables back-up recordings to the second internal hard disk drive to keep data secure. 

DNR400 features FLIR Cloud, an easy-to-use, cloud-enabled service that provides remote viewing and control of multiple cameras from various locations via iOS, Android, PC or Mac devices. No complex router configuration necessary, making video monitoring easier than ever before. Set up remote viewing in three easy steps: install the free FLIR Cloud app, scan QR code on NVR, view live video.

FLIR DNR408PO Features

• Higher Capacity Processing
• Real-time recording in Full HD on each channel
• Turbo 200 Mbps network bit rate
• Supports HD real-time recording with cameras up to 5MP
• Pentaplex operation - simultaneous View, Record, Playback, Backup & Remote Monitoring
• Easy Installation
• Integrated PoE inputs for quick, convenient connection
• 8 integrated PoE ports with PoE+ support
• 120watt total PoE (up to 25w/channel)
• Auto-discovery of FLIR IP Cameras with no programming
• Redundant Recording
• Back-up to keep data secure
• Drive mirroring to second internal HDD
• Supports 2 x SATA HDDs up to 4TB (8TB total)
• Instant back-up via 2 x USB 2.0 ports
• Flir Cloud - Quick & Secure Remote Viewing
• Remote access via iOS, Android, PC / Mac with FLIR Cloud
• Set up remote viewing in three easy steps: install FLIR Cloud app, scan QR code on DVR, view live video
• Multisite viewing on FLIR Cloud CMS for PC / Mac

FLIR DNR408PO SpecificationsOperating SystemLinux (embedded)PentaplexSimultaneous view, record, playback,backup & remote monitoringNumber of Channels8 ChannelVideo IN8 PoE Video InputVideo OUTNoVGA OUTYesHDMIYesAudio IN1 Line IN (RCA) for 2 way audioAudio OUT1 Line OUT (RCA) for 2 way audioUSB Port1 at the back, 1 at the frontAlarm IN4 Alarm INAlarm OUT2 Alarm OUTVideo Output Resolution1920x1080, 1280x1024, 1280x720, 1024x768PTZ ControlRS-485, supports Pelco-D and Pelco-PLive Display1,4,8Live Display Speed240 NTSCOSDON/OFFSystem NavigationUSB mouse, IR remote controller, front panelMotion Area SettingAdjustable grid (22x18)SensitivityLevels 100Firmware UpgradeAutomatic over the Internet & via USB device and networkUser AuthorityBy user groupTime SynchronizationAuto time sync by NTP serverCompressionH.264Recording Resolution720P (1280x720), 1080P (1920x1080), 3MP (2028x1536), 5MP (2560x1920)Record Rate240 (30 per channel) FPS @ 720P / 1080P / 3MP / 5MPRecording Quality Control6 levelsRecording ScheduleBy hour, by day, by recording mode, by motion, by channelPre RecordingMax. 30 SecondsPost RecordingMax. 5 MinutesReliabilityWatch-Dog, auto-recovery after power failureCovert VideoYesPlayback Channel1/4Playback SpeedVariable Max 16xPlayback PlayersBackup PlayerSearchBy time & eventLog SearchUp to 1,000 lines for motion detected, configuration changes, connects/disconnects and video lossAudio PlayYes (audio camera required)StorageUp to 2 HDDs (SATA)Maximum CapacityUp to 2 x 4TBBackup MediaBackup Media USB flash drive & HDDBackup File FormatDAV or ASF fileCloud ConnectionFLIR CloudSupported Operating SystemsWindows, Mac OSXRemote SoftwareClient Software (PC/Mac)Email NotificationText with snapshotInstant Smart Phone & Tablet SupportIPad, IPhone, AndroidDDNS FreeFLIR DDNSSystem ConfigurationFull setup configuration over networkPortsProgrammable by UserNetwork ProtocolHTTP, IPv4/IPv6, TCP/IP, UPNP, RTSP, UDP, SMTP, NTP, DHCP, DNS, PPPOE, DDNS, FTP, IP FilterNetwork Bit Rate200Mbs total, 48-8192kbps per cameraIP Cameras SupportedFLIR, Digimerge, Panasonic, Sony, Dynacolor, Samsung, AXIS, Arecont, Bosch, Canon, Honeywell, Pelco, Panasonic, VivotekPower ConsumptionApprox. 20 watts (No HDD Installed)Supply Voltage100V AC-240V AC, 50/60HzTotal PoE Power Output (across all chann120W (Max 25W per Camera)Unit Weight2.0Kg / 4.4lbsDimensions (W x H x D)267mm x 203mm x 46mm / 10.5" x 8.0" x 1.8"Operating Temperature14 Degree - 131 Degree F / -10 Degree - 55 Degree C